What is the main reason for the leakage of compressed air pipeline

The compressed air line is leaking, mainly due to seal and damage problems. In addition, your three filters and the air line need to be checked for clogging. This is mainly due to the lack of timely maintenance. Air leakage from the suction valve only increases the intake temperature, and leakage from the discharge valve is not so simple. It will change the compression index and produce waste gas based on an increase in the intake temperature. When the temperature rises sharply and the exhaust gas temperature rises, a large amount of carbon deposits will be produced.

The thickening of the carbon deposits will lead to a rise in the temperature of the exhaust gas, which is a vicious circle. If the carbon is not treated, the pipe will catch fire naturally. Air compressor cooling effect is poor. Many air compressors now operate under poor cooling or poor conditions, resulting in an increase in the air compressor intake temperature. Due to poor cooling of the cylinder, carbon accumulates rapidly in the exhaust valve and exhaust chamber. Not only air compressors, but also process compressors in some large chemical plants operate under poor cooling conditions, resulting in high power consumption and carbon deposition. When the air compressor inlet temperature is high, the water pressure is low, the return pipe diameter is small, the return water is limited, limiting the water intake.

Compressed air pipeline, the air compressor can calculate the amount of oil. Too much oil filling. Accelerate the rate of carbon deposition. Second, the exhaust pipe can accumulate excess lubricating oil, which can easily raise the temperature of the carbon layer and catch fire. The layout of the exhaust pipes is unreasonable. Since air compressor piping is a dangerous and troublesome business, different companies have taken different approaches to it, with different results.

Some senior engineers are more experienced and they can handle it. Clogged air filters result in reduced air intake. Remove the air filter for a brief test to see if the pressure has improved (devices without a safety filter should be careful to ensure that debris does not enter the nose) air compressor pipe false air volume is insufficient: increased gas volume used in subsequent equipment, or pipe leakage. A drill can be used to form a geological seam.

For compressed air lines, check the air compressor section to prevent problems with the air compressor section and close the ball valve to check the rated pressure. For the electric unit, judge whether the current is always the same as the current at the rated pressure under normal pressure, so as to judge whether there is a large change in the amount of gas. Some air compressor manufacturers in the design of oil and gas separation tank, the main separation system design is not reasonable, the primary separation effect is not ideal, the concentration of oil mist before oil, oil load is too heavy, processing capacity is insufficient, resulting in fuel consumption. Too high. I bought this product, there is no way to operate this technology!